The problem aspects of improving technology of making castings in the moulds from quartz sand

Шрифт:
257

Mamishev V., Shinskij O., Sokolovska L.

https://doi.org
UDC 621.746

Summary:

The comparative analyses of basic advantages and disadvantages of current technologies of casting into sand moulds for the purpose of obtaining fine structure of the castings is carried out.

Keywords:

casting, sand mould, steel, pig iron, crystallization process

REFERENCES:

  1. Efmov V. A. (Eds.) (1991). Special'nye sposoby lit'ja [ Special casting methods] . Moscow: Mashinostroenie [in Russian].
  2. Sosnenko M. N. (1967). Sovremennye litejnye formy [ Actual casting molds] (2nd ed.). Moscow: Mashinostroenie [in Russian].
  3. Emel'janova A. P. (1968). Tehnologija litejnoj formy [ Casting molds technology]. Moscow: Mashinostroenie [in Russian].
  4. Vejnik A. I. (1972). Kokil' [Iron mold]. Minsk: Nauka i tehnika [in Russian].
  5. Burakov S. L., Vejnik A. I., Dubinin N. P. et al.( 1980) Lit'jo v kokil' [Chill casting]. Moscow: Mashinostroenie [in Russian].
  6. Belopuhov A. K. (Eds.) (1975). Lit'jo pod davleniem [Die casting]. (2nd ed.). Moscow: Mashinostroenie [in Russian].
  7. Belopuhov A. K. (1985). Tehnologicheskie rezhimy lit'ja pod davleniem [ Technical regimes for die casting ]. Moscow: Mashinostroenie [in Russian].
  8. Judin S. B., Levin M. M., Rozenfel'd S. E. (1972). Centrobezhnoe lit'jo [Centrifugal casting]. (2nd ed.). Moscow: Mashinostroenie [in Russian].
  9. Shevchenko A. I. (1991). Centrobezhnoe lit'jo pod fljusom [ Submerged centrifugal casting]. Kiev: Naukova dumka [in Russian].
  10. Smirnov A. N., Kuberskij S. V., Shtepan E. V. (2011). Nepreryvnaja razlivka stali [ Continuous steel casting]. – Doneck: DonNTU [in Russian].
  11. Baranov O. A., Vetrov B. G., Pol' V. B. et al. (1968). Nepreryvnoe lit'jo chuguna [Continuous iron casting]. Moscow: Metallurgija [in Russian].
  12. Sosnenko M. N. (1963). Graftovye litejnye formy [ Graphite molds]. Moscow: Mashgiz [in Russian].
  13. Shklennik Ja. I., Baranov A. V., Ivanov V. N. et al. (1961). Lit'jo po vyplavljaemym modeljam [Lost-wax casting]. Moscow: Mashgiz [in Russian].
  14. Strjuchenko A. A., Zaharchenko Je. V( 1988). Keramicheskie formy v tochnom lit'e po postojannym modeljam. [Ceramic molds for precise casting into permanent molds].). Moscow: Mashinostroenie [in Russian].
  15. Korotkov A. I., Polevaja A. M. (1963). Lit'jo v obolochkovye formy [Shell casing]. Moscow: Mashgiz [in Russian].
  16. Mamishev V. A. (2002). Uluchshenie kachestva otlivok i slitkov s pozicij sistemnogo analiza [Castngs and ingots enhancement from a systems analyses perspective]. Proceedings from Conference Foundry in the new century: How to win the competition: Litejnoe proizvodstvo v novom veke – kak pobedit' v konkurencii. Kiev: PTIMA of NAS of Ukraine, (pp.31-34) [in Russian].
  17. Mamishev V. A., Shinskij O. I., Sokolovskaja L. A. (2010). Sistemnyj analiz processa zatverdevanija lityh zagotovok raznoj massy i naznachenija [Systems analyses for solidifcation of cast sections with different weight and destination]. Processy lit'ja. – Casting processes, 1, 20-24 [in Russian].
  18. Mamishev V. A., Shinskij O. I., Sokolovskaja L. A. (2015). Teplofzicheskie aspekty intensifkacii zatverdevanija otlivok iz stali i chuguna v forme iz kvarcevogo peska [Thermophysical aspects of intensifcation for steel and iron castings solidifcation in siliceous sand mold]. Metall i lit'jo Ukrainy. – Metal and casting in Ukraine, 3, 33-36 [in Russian].
  19. Mamishev V. A., Shinskij O. I., Sokolovskaja L. A. (2015). Fiziko-himicheskie aspekty uluchshenija temperaturnyh uslovij kristallizacii Fe-C splavov v polosti peschanyh forme [Physical and chemical aspects of temperature conditions enhancement for Fe-C alloys in sand mold cavity]. Metall i lit'jo Ukrainy. – Metal and casting in Ukraine, 11, 19-23 [in Russian].
  20. Vasilevskij P. F. (1974). Tehnologija stal'nogo lit'ja {Steel casting technology]. Moscow: Mashinostroenie [in Russian].
  21. Doroshenko S. P., Drobjazko V. A.,Vashhenko K. I. (1978). Poluchenie otlivok bez prigara v peschanyh formah [Getting castiongs without burning-on in sand molds] Moscow: Mashinostroenie [in Russian].
  22. Guljaev B. B. (1960). Litejnye processy {Casting processes]. Moscow – Leningrad: Mashgiz [in Russian].
  23. Mamishev V. A., Shinskij O. I., Sokolovskaja L. A. (2014). Fiziko-tehnologicheskie aspekty zatverdevanija fasonnyh otlivok v peschanoj forme [Physical and technological aspects of shape castings solidifcation in sand mold]. Metall i lit'jo Ukrainy. – Metal and casting in Ukraine, 9, 28-30 [in Russian].
  24. Mamishev V. A., Shinskij O. I., Sokolovskaja L. A. (2015). Prikladnye aspekty povyshenija kachestva otlivok pri ih zatverdevanii v peschanyh formah [Applicable aspects of castings quality improvement during their solidifcation in sand molds]. Metall i lit'jo Ukrainy. – Metal and casting in Ukraine, 6, 18-21 [in Russian].
  25. Guljaev B. B. (1950). Zatverdevanie i neodnorodnost' stali [Solidifcation and heterogeneity of steel]. Leningrad – Moscow: Metallurgizdat [in Russian].
  26. Hvorinov N. (1958). Kristallizacija i neodnorodnost' stali [Crystallization and heterogeneity of steel]. Moscow: Mashgiz. [in Russian].
  27. Ozerov V. A. (1988). Avtomatizacija proizvodstva otlivok v peschanyh formah [Production automation for sand castings]. Moscow: Vysshaja shkola[in Russian].
  28. Ljass A. M. (1965). Bystrotverdejushhie formovochnye smesi [quick-hardening investments]. Moscow: Mashinostroenie. [in Russian].
  29. Zhukovskij S. S., Ljass A. M. (1978). Formy i sterzhni iz holodnotverdejushhih smesej [Molds and cores from cold-hardening investments]. Moscow: Mashinostroenie [in Russian].
  30. Budanov E. N. (2009). Sem' osnovnyh mifov i zabluzhdenij otnositel'no litejnogo proizvodstva [Seven main legends and illusions about foundry]. Litejnoe proizvodstvo – Foundry, 8, 2-8 and 9, 2-10. [in Russian].
  31. Ozerov V. A., Shuljak V. S., Plotnikov G. A. (1970). Lit'jo po modeljam iz penopolistirola [ Polystyrene pattern casting]. Moscow: Mashinostroenie [in Russian].
  32. Minaev A. A., Notkin E. B., Sazonov V. A. (1988). Vakuumnaja formovka {Vacuum forming]. Moscow: Mashinostroenie. [in Russian].
  33. Gruzman V. M. (2009). O sud'be i perspektivah primenenija zamorozhennyh form [About destiny and chances of frozem molds usage]. Litejnoe proizvodstvo – Foundry, 7, 14-17. [in Russian].
  34. Mamishev V. A. (2012). O povyshenii jeffektivnosti teploobmena v sisteme litaja zagotovka-forma-okruzhajushhaja sreda [About enhancement of heat transfer effciency in ingot-mold-environment system]. Metall i lit'jo Ukrainy. – Metal and casting in Ukraine, 11, 31-35 [in Russian].
  35. Sokolovskaja L. A., V. A.Mamishev (2014). O vozniknovenii dopolnitel'nyh centrov kristallizacii pri vvedenii drobi v rasplav [About rise of additional crystallization centers under shots adding into melt]. Metall i lit'jo Ukrainy. – Metal and casting in Ukraine, 7, 35-38 [in Russian].
  36. Zatulovskij S. S (1981). Suspenzionnaja razlivka [Suspension pouring].Kiev: Naukova dumka [in Russian].
  37. Kirievskij B. A., Cherkasskij V. L. (1978). Osobennosti suspenzionnogo lit'ja [Suspension casting peculiarities]. Litejnoe proizvodstvo – Foundry, 8, 25-27. [in Russian].
  38. Mamishev V. A., Shinskij O. I., Sokolovskaja L. A. (2014). Fiziko-matematicheskie aspekty zatverdevanija otlivok raznoj geometrii v peschanoj forme [ Physical and mathematical aspects of castings solidifcation in sand molds]. Metall i lit'jo Ukrainy. – Metal and casting in Ukraine, 11, 21-24 [in Russian].
  39. Sokolovskaja L. A., Mamishev V. A. (2009). O matematicheskom modelirovanii zadach s fazovymi perehodami v metallurgii i litejnom proizvodstve [About simulation of phase-change problems in metallurgy and foundry]. ]. Processy lit'ja. – Casting processes, 2, 24-29 [in Russian].
  40. Sokolovskaja L. A. (2011). Uchjot teplovogo soprotivlenija nemetallicheskih prosloek v kontaktnoj zone teploobmena [Account of heat resistance of non-metal interlayers in heat transfer contact zone]. Proceedings from Foundry: technology, materials, equipment, economy, and ecology. International Scientisic and Practical Conference – Litejnoe proizvodstvo: tehnologija, materialy, oborudovanie, jekonomika i jekologija. Mater. mezhdunarod.nauchno-prakt. konf. Kiev: PTIMA NASU, pp.265-258 [in Russian].
  41. Sokolovskaja L. A., Mamishev V. A. (2015). Teplofzicheskoe obosnovanie programm rascheta temperaturnyh polej pri zatverdevanii slitkov i krupnyh otlivok s vvodom v rasplav litoj drobi [Thermophysical ground for temperature felds calculation programs during solidifcation of ingots and large castings under cast shots adding into melt]. Processy lit'ja. – Casting processes, 5, 61-69 [in Russian].
  42. Mamishev V. A. (2015). Sistemnoe issledovanie reotermicheskih processov techenija i teplo-obmena pri kristallizacii splavov [System study of reo-thermal processes of flow and heat transfer during alloys crystallization]. Processy lit'ja. – Casting processes, 1, 39-46 [in Russian].

Statements about the conditions for obtaining the full text of the article:

On a prepaid subscription magazine for 1 month.
You can get acquainted with the cost of a subscription on this page.