Estimation of the penetration depth of a gas jet in liquid on the basis of statistical models

Шрифт:
242

Paniotov U. , Mameshin V., Zhuravleva S.

https://doi.org
UDC 669.18

Summary:

The estimation of the penetration depth of the gas jet into liquid for different methods of blowing was carried out and the generalized statistical model of the penetration depth of the gas jet, considering the method of blowing and based on the full jet power characteristic was proposed.

Keywords:

gas jet, blowing, the jet power characteristics, the dimensionless momentum, Archimedean force

REFERENCES:

  1. Markov B. L. (1975). Metody produvki martenovskoj vanny / B. L. Markov. – Moskow: Metallurgija, pp. 280. [in Russian].
  2. Ginzburg I. P., Surin V. A., Bagautdinov A. A., Grigor'janc A. S., Shub L. I. (1977). Izuchenie processa istechenija v zhidkost' gazovogo potoka iz zaglubljonnogo sopla. Minck: Inzhenerno-fzicheskij zhurnal, no 2, pp. 213-223. [in Russian].
  3. Kazancev I. G. (1952). Issledovanie dinamiki gazoobraznoj strui vtekajushhej v zhidkost. Termicheskaja i plasticheskaja obrabotka metallov: Sb. nauch. tr. Zhdanovskogo metallurgicheskogo institute, – Moskva: Metallurgizdat, V. 2. pp. 56-68. [in Russian].
  4. Efmov L. M. (1957). Trudy nauchno-tehnicheskogo obshhestva chjornoj metallurgii: materialy vsesojuznogo soveshhanija staleplavil'shhikov, t. XVIII, ch. 1. Moskow: Metallurgija, pp. 40-57. [in Russian].
  5. Baptizmanskij V. I., Shhedrin G. A., Prosvirin K. S. (1975). Razmery reakcionnoj zony pri produvke metalla kislorodom sverhu. Moskow: Izv. VUZov. Chjornaja metallurgija, no 10, pp. 44-48. [in Russian].
  6. Hmelevskaja E. D. (1964). Ispol'zovanie tvjordyh topliv sernistyh mazutov i gazov. Moskow: Nauka, pp. 193-219. [in Russian].
  7. Frolov V. A. (1967). Glubina proniknovenija gazovoj strui v zhidkost' pri gorizontal'nom vduvanii gaza. Moskow: Izv. VUZov. Chjornaja metallurgija, no 3, pp. 37-40. [in Russian].
  8. Ginzburg I. P., Surin V. A., Sizov A. M. et al. (1977). Nekotorye voprosy gidrogazodinamiki i massoobmena v processah metallurgii i himicheskoj tehnologii: sb. Gidroajeromehanika i teorija uprugosti. V. 22. Dnepropetrovsk: DGU, pp. 3-17. [in Russian].
  9. Spesivcev V. A., Mechev V. V., Strekalovskij G. B., Vanjukov A. V. (1973). Vzaimodejstvie gazovoj strui s plotnymi sredami pri bokovoj podache dut'ja. Moskow: Cvetnye metally, no 2, pp. 12-14. [in Russian].
  10. Baptizmanskij V. I., Trubavin V. M., Bojchenko B. M. (1980). Vzaimodejstvie gazovyh struj s zhidkim metallom v kislorodnyh konverterah donnogo dut'ia. Moskow: Izv. VUZov. Chiornaia metallurgiia, no 10, pp. 33-28. [in Russian].
  11. Taldykin I. A., Balakin V. V., Cygankova V. P. (1989). Predotvrashhenie proboja konverternoj vanny pri donnom dut'e. no 1, pp. 36-38. [in Russian].
  12. Protopopov E. V., Chernjatevich A. G., Lavrik, E. L. Masterovenko D. A. (2002). Osobennosti vzaimodejstvija donnyh kislorodno-toplivnyh struj s konverternoj vannoy. Moskow: Izv. VUZov. Chiornaia metallurgiia, no 10, pp. 14-17. [in Russian].
  13. Grechko A. V., Nesterenko R. D., Kudinov Ju. A. (1976). Praktika fzicheskogo modelirovanija na metallurgicheskom zavode. Moskow: Metallurgija, pp. 224. [in Russian].
  14. Paniotov Ju. S., Ivashhenko V. P., Tarakanov A. K., Mameshin V. S., Buturlim A. N. (2006). Gidrodinamika vanny agregata Romelt: trudy XII mezhdunarodnoj nauchn. tehn. konferencii «Teorija i praktika staleplavil'nyh processov» (Dnepropetrovsk, 2006). Dnepropetrovsk. [in Russian].
  15. Mameshin V. S. (2008). Udoskonalennja tehnologії rіdkofaznogo vіdnovlennja na osnovі doslіdzhennja gіdrodinamіki vanni metodom holodnogo modeljuvannja: Avtoref. dis. k-ta tehn. nauk: 05.16.02 / Nacіonal'na metalurgіjna akademіja Ukraїni. – Dnіpropetrovs'k. [in Russian].

Statements about the conditions for obtaining the full text of the article:

On a prepaid subscription magazine for 1 month.
You can get acquainted with the cost of a subscription on this page.