Control of melt dosing

Шрифт:
258

Bogushevskiy V.,
Antonevich O.

https://doi.org
UDC 621.74.043.2

Summary:

Existing methods of dosing metal melts in mold pouring devices, including automated complexes of casting under pressure, are considered and analyzed. The advantages and disadvantages of different types of dosing devices are determined. A combined method of melt dosing is proposed and equipment and methods are described, as a result of which a more accurate measurement of the metal dose is achieved and the technical and economic parameters of the process are improved.

Keywords

Die-casting, dosing, melt, automatization

REFERENCES:

  1. Hini E. Ch., Zarubin A. M., Rybkin V. A. (2005). Tekhnologia liteinogo proizvodstva. Spetsialnye vidy lit’ia [Technology of foundry production. Special types of casting]. V. A. Rybkin (Ed.). Moscow: Academia, 352 p. [in Russian].
  2. Antonevich Ya. K. (2012). Suchasnyi stan ta perspektyvy rozvytku protsesu lyttia pid tyskom [The current state and prospects of die-casting process]. Specіal’na metalurgіia: vchora, s’ogodnі, zavtra. Zbіrnik materіalіv konferencії. Kiev, pp. 48-54 [in Ukrainian].
  3. Moiseev Yu. V., Lichak A. I. (2008). Avtomatizatsia spetsialnykh sposobov lit’ia [Automation of special methods of casting]. Protsessy litia, no. 1, pp. 31-37 [in Russian].
  4. Slazhnev N. A., Bogdan K. S. (2011). Elektromagnitnoe upravlenie protsesom zalivki metalicheskikh rasplavov iz magnitovesovoi ustanovki v liteinye formy [Electromagnetic control of the process of pouring metal melts from a magnet assembly into molds]. Protsessy lit’ia, no. 2, pp. 28-31 [in Russian].
  5. Slazhnev N. A., Dybodelov V. I., Bogdan K. S. (2011). Issledovanie dinamicheskikh protsesov pri dozirovnnoi razlivke aliuminievykh rasplavov iz magnitovesovoi liteinoi ustanovki [Investigation of dynamic processes during dosed casting of aluminum melts from a magnet casting plant]. Protsessy lit’ia, no. 4, pp. 9-14 [in Russian].
  6. Dybodelov V. I., Slazhnev N. A., Bogdan K. S. (2012). Avtomatizatsia protsesov prigotovlenia, obrabotki i dozirovannoi razlivki aliuminievykh rasplavov iz magnitovesovoi liteinoi ustanovki [Automation of the processes of preparation, processing and dosing casting of aluminum melts from a magnet casting plant]. Metallurgicheskaia i gornorudnaia promyshlennost’, no. 5, pp. 85-89 [in Russian]